[admin]

In modern animal husbandry, feed mixers are one of the indispensable equipment. However, in actual use, due to various reasons, feed mixers may have blockage problems, which will not only affect production efficiency, but also cause equipment damage. Therefore, it is crucial to solve the blockage problem of feed mixers. This article will discuss how to solve this problem and provide some practical solutions and preventive measures.

First of all, we need to understand the reasons for the blockage of feed mixers. Generally speaking, the main reasons for the blockage of feed mixers are as follows:

Feed particles are too large: If the particles of feed raw materials are too large and exceed the processing capacity of the mixer, it is easy to cause blockage. Therefore, before using the feed mixer, we need to crush the feed raw materials to make their particle size suitable for the requirements of the mixer.

Feed raw materials are too wet: If the feed raw materials are too wet, the viscosity will increase and they are easy to stick to the inner wall of the mixer, causing blockage. Therefore, before using the feed mixer, we need to dry the feed raw materials to make their water content suitable for the requirements of the mixer.

Internal deposits in the feed mixer: Long-term use of the feed mixer will lead to the accumulation of internal deposits, which will affect the normal operation of the mixer. Therefore, we need to clean and maintain the feed mixer regularly to keep its interior clean.

Wear or deformation of the mixing blades: After long-term use, the mixing blades may be worn or deformed, affecting the mixing effect and causing blockage.

Improper operation: Excessive feeding or feeding speed exceeds the processing capacity of the mixer, which can also cause blockage.

In view of the above problems, we can take the following measures to solve the blockage problem of the feed mixer:

Crushing feed raw materials: Before using the feed mixer, we can use a crusher to crush the feed raw materials so that their particle size is suitable for the requirements of the mixer. This can effectively avoid the blockage problem caused by excessive feed particles.

Control the humidity of the feed raw materials: Before using the feed mixer, we need to dry the feed raw materials to make their water content suitable for the requirements of the mixer. If the feed raw materials are too wet, we can use an air dryer or drying equipment to dry them. This can effectively avoid the blockage problem caused by excessive moisture in the feed raw materials.

Regularly clean and maintain the feed mixer: Long-term use of the feed mixer will lead to the accumulation of internal deposits, thereby affecting the normal operation of the mixer. Therefore, we need to clean and maintain the feed mixer regularly to keep its interior clean. Cleaning agents and high-pressure water guns can be used for cleaning to ensure that the interior of the feed mixer is clean and free of accumulation.

Regularly check and replace wearing parts: The wearing parts of the feed mixer, such as blades and screens, will wear and age after long-term use, which will also cause blockage problems. Therefore, we need to regularly check and replace these wearing parts to ensure the normal operation of the feed mixer.

Standardize the operating procedures: formulate strict operating procedures, control the feeding amount and feeding speed, and avoid overload operation.

When the feed mixer is blocked, stop the machine immediately, cut off the power supply, and then open the inspection door of the mixer or disassemble the relevant parts to manually clean the blockage. For blockages that are difficult to clean manually, professional cleaning tools such as long poles, hooks, etc. can be used to help remove the blockage.

The blockage problem of the feed mixer is one of the important factors affecting the production efficiency of the breeding industry. By analyzing the causes of blockage and taking effective preventive measures and solutions, the probability of blockage can be significantly reduced and the normal operation of the feed mixer can be guaranteed. At the same time, strengthening operator training and daily maintenance of equipment is also the key to ensure long-term stable operation of equipment. Only by comprehensively applying multiple strategies can the clogging problem of feed mixers be fundamentally solved and strong support be provided for the healthy development of the breeding industry.

As a feed mixer supplier from China, we are well aware of the important role of feed mixers in animal husbandry and breeding. In the face of clogging problems, we not only provide advanced equipment, but also are committed to providing customers with comprehensive solutions. From optimizing design, improving mixing efficiency to providing professional operation training and maintenance guidance, we ensure that each device can operate stably, help customers improve production efficiency, reduce costs, and jointly promote the healthy development of the breeding industry.

https://www.fast-js.com/
Jiangsu FAST Intelligent Equipment Co., Ltd.

[Author]

Posts